In this article, you'll learn how to create a solar panel at home, allowing you to power small devices like clocks, radios, and more.
Part 1
Step 1. Take a copper sheet and cut it into equal parts.
Take a copper sheet and cut it into equal parts. You should end up with two sheets of the same size.
Step 2. Heat one part of the copper sheet on a stove or gas burner.
Take one part of the copper sheet and heat it on a stove or gas burner. Heat it for 20-30 minutes. Then set the sheet aside to cool.
Step 3. Attach a copper wire to this sheet.
Attach a copper wire to this sheet. Clean the area where the wire will be attached.
Step 4. Take the second part of the copper sheet and attach a copper wire to it as well.
Step 5. Take a plastic bottle and cut it in half.
Take a plastic bottle and cut it in half. Prepare a saline solution and pour it into the bottom half of the bottle.
Step 6. Insert the heated copper sheet into the bottle.
Insert the heated copper sheet into the bottle. Make sure the wire does not touch the water.
Step 7. Insert the second copper sheet opposite the first one.
Step 8. Your solar cell is ready.
Your solar cell is ready. Now you can connect the desired device (clock, radio, etc.) to the copper wire attached to the sheets.
